Tire Repair Spray

Applic­a­tion

1. Remove the cause of the puncture (e.g. nail, screw) if possible, then turn the wheel so that the damaged section is at the bottom and let out all of the air.
2. Shake bottle well. If cold, warm it up (vehicle heater).
3. Screw the connector onto the tire valve.
4. Hold bottle vertically as much as possible and release the entire contents.
Note:
Immediately drive at a moderate speed for 10 – 15 km so that the product can optimally distribute itself on the tire surface. Then correct the tire pressure. Do not forget to go to a workshop to have the tire professionally repaired.

Other inform­a­tion

• simple to use
• subsequent tire repair possible
• suitable for all common passenger car tire sizes
• rapid remedy for punctures without dismantling