EP Cutting Oil

EP Cutting Oil is a very high-quality cutting oil. The product is extremely well suited to make fast processing methods such as drilling, tapping, turning and milling, more effective. This is because EP Cutting Oil lubricates well and lowers frictional resistance.

The synthetic additives quickly conduct away the heat generated during processing. EP Cutting Oil takes the form of a foam, and not only does this make it economical, but it helps it stay in place on sloping surfaces.

The product can be applied for a problem-free processing of all metals, metal alloys and even stainless steel.

EP Cutting Oil is indispensable in the professional workshop and, of course, in any construction division. The product ensures effective processing of metal parts for construction or repair. Therefore, EP Cutting Oil can be used to work more quickly and easily on lots of supports, braces and other custom-made construction modifications. As a foam the product stays in place under all circumstances, even when used underneath a vehicle chassis, for example.

EP Cutting Oil provides perfect lubrication. The product's cooling and lubrication not only ensure that the work is a lot easier, but they also ensure that the tools are much less prone to wear, giving them a longer working life.
The high-quality oils in EP Cutting Oil also provide the parts processed with a first line of defence against corrosion.
Naturally, EP Cutting Oil is composed to be incombustible.

The aerosol packaging makes EP Cutting Oil very user-friendly and easy to use. Thanks to the unbreakable nozzle with straw, even hard-to-reach places can be treated without any problem. In addition, the aerosol is equipped with a special valve that allows it to be used in any position.

Base: Mineral oil supplemented with synthetic EP additives
Density: 822 kg/m³
Consistency: Liquid foam (ready-to-use in aerosol)
Viscosity: ± 8 mPa.s
Flash point: < 0°C
Pressure resistance: Very good, due to the EP additives
Temperature resistance: -30°C to +300°C
Water resistance: Moderate
Penetration ability: Good
Percentage of greasing agent: 90%
Tests: Resistant to copper corrosion: 1 (2 hours / 100°C)
Application conditions: +10°C to +40°C
Type of surface: All kind of metals
Surface preparation: The surface must be clean, dry, free of grease and non-corroded. Clean surfaces with Innotec Multisol, Innotec Ultra Clean or Innotec Power Clean.
Application method: Shake can well before use. Spray directly on the surface to be treated and leave a short time to evaporate.
Cleaning of materials used: With Innotec Multisol or Innotec Power Clean
Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
Shelf life: 1 year in original, unopened packaging
Storage conditions: Store cool and dry
Type of batchcode: F
EAN Code: 5400563016374